PDA

View Full Version : 85 GLH's sort block and A525 tranny in AZ



tryingbe
01-17-2006, 11:49 PM
85 GLH's sort block and A525 tranny in AZ plus stock clutch.
I upgraded and they are no use to me anymore.

Compression was 110, 90, 70, 100. It needs a rebuilt.
Tranny shifted fine, no noise.

$10, come pick them up they're yours.

tryingbe
01-19-2006, 09:41 PM
Last bump before I junk them this weekend.

The S is Silent
01-19-2006, 10:53 PM
If you are going to junk them, at least pull the rods out of the motor...they are the same as the TII rods once you get the small ends modified for the floating wrist pin. They should fetch at least a little bit of $$$.

For that matter, do you have the flywheel from that combo, or are you using it with the upgraded parts? If you have it, I'd be interested in it.

tryingbe
01-20-2006, 01:08 AM
$10 + shipping, flywheel is yours.

The S is Silent
01-20-2006, 07:09 PM
How much is shipping to 29630? $10 sounds like good action for that.

tryingbe
01-20-2006, 11:29 PM
I'll have to take it off to weight it tomorrow.
I'm guessing the weight right now, shipping is about $21.

The S is Silent
01-20-2006, 11:41 PM
Let me know what the official price is for shipping.

87glhs232
01-21-2006, 12:15 AM
If Matt doesnt want them (and I hope he doesnt :o ), I DEFINITLY do. Just had the 525 in my GLHS x-plod and REALLY need a tranny to get by while new motor and hybrid tranny are built. And I could always use motor parts. LMK.

The S is Silent
01-21-2006, 12:26 AM
I only want the flywheel. If you want the trans, it's all yours.

87glhs232
01-21-2006, 12:28 AM
I only want the flywheel. If you want the trans, it's all yours.
I just re-read and realized that. Cool. Now I just have to figure out how to get them from Mesa to here.

tryingbe
01-21-2006, 09:06 AM
87glhs232,

So, you want the short block and tranny?

87glhs232
01-21-2006, 10:22 AM
87glhs232,

So, you want the short block and tranny?

Yep. I'll PM ya.

Phreakish
01-21-2006, 11:18 PM
I'm up in prescott, can make a trip down there and bring the parts out to Tehachapi (mojave, palmdale, bakersfield area) in late Feb or late march if shipping is a bear or if you can wait. LMK!

tryingbe
01-21-2006, 11:43 PM
The S is Silent
Sorry, I went out of time today. I'll pull the flywheel out tomorrow for sure.

87glhs232
pm replied.

Phreakish
I'm pretty sure 87glhs232 got it covered.

87glhs232
01-22-2006, 01:30 AM
Thanks Phreakish, I'm driving out next weekend though.

Phreakish
01-22-2006, 05:41 PM
ah, just figured I'd offer, I know how hard it is for us in the west to find parts and cars :)

87glhs232
01-22-2006, 07:53 PM
ah, just figured I'd offer, I know how hard it is for us in the west to find parts and cars :)
Very true.:)

tryingbe
01-23-2006, 10:56 PM
The S is Silent
Shipping cost PMed.


87glhs232
Just to let you know, bring a lot of cardboard boxes and old clothe. The engine/tranny is very grease/dirty.

87glhs232
01-25-2006, 09:20 PM
The S is Silent
Shipping cost PMed.


87glhs232
Just to let you know, bring a lot of cardboard boxes and old clothe. The engine/tranny is very grease/dirty.
:p thanks for the warning!