16V Head on N/A Motor [Archive] - Turbo Mopar Forums

View Full Version : 16V Head on N/A Motor

lansingsportsrage

01-19-2007, 11:19 AM

Two Quick Questions

1.) Can you put a 16V head on a traditional common block 2.5 n/a motor.

2.) Does the head look significantly different appearance wise ?

JDAWG

01-19-2007, 11:28 AM

1-yes 2.0 and 2.4 NA's are 16v
2- different than what? an 8v head? yes very

Whorse

01-19-2007, 04:47 PM

16V Neons have a similar setup to the lotus heads.

Vigo

01-20-2007, 10:59 PM

an n/a hybrid motor is a lot of work compared to an n/a 2.4 swap i would venture. n/a 2.4s can be plenty badass and you'll have a lot more experience to fall back on in the community with proven mods and stuff.

boneyardracing

01-20-2007, 11:24 PM

What is involved with just swapping the 2.0/2.4 into a TD?

turbovanman²

01-20-2007, 11:28 PM

Two Quick Questions

1.) Can you put a 16V head on a traditional common block 2.5 n/a motor.

2.) Does the head look significantly different appearance wise ?

Yes, and it would be a nice swap but you'd probably want to use some higher compression pistons to get more benefit out of the swap.

What is involved with just swapping the 2.0/2.4 into a TD?

Both of you check out the 16 valve conversion section, lots of info and whats involved in the swap.

Speedeuphoria

01-21-2007, 01:16 AM

What is involved with just swapping the 2.0/2.4 into a TD?

moding the motor mounts,wiring, pwr steering, exhaust, ect..