Dodge Spirit vac. line ID

[DodgeVienna]

Hallo, does anybody know how much the ID from the vac. lines are? i don´t want to messure it, because the lines will be broken after that.
i need the ID from the line between waste gate and turbo charger, throotle body and vapor canister.

i have a dodge spirit 2,5 turbo 1990

regards from austria

steve

[Speedeuphoria]

just get rid of the vapor canister, and cap that line on the TB

[shadow88]

^^ that wasn't much help.

I'm pretty sure the i.d. of the wastegate line (and most of the others) are 1/8". You can patch broken lines with normal washer fluid hose with reasonable ease.

The larger line from the canister to t/b ..... I'm not totally sure, but it's probably more like 1/4 " You may be able to patch it with some fuel line and a touch of sealer i.e. silicone.

[ShelbyZD]

I just measured last night.. I came up with 4 different sizes.

1/8th = 3.5mm

3/16th = 6mm

8mm and 10mm ... whatever those are in inches.

[Austrian Dodge]

get a vacuum block and re do the whole vac system...saves you a lot of frustration