8valves
12-20-2005, 08:15 PM
I need this stuff gone. I am going home Wednesday night for Xmas break until the 3rd of January, so if you want something let me know asap!
-Turbonetics Super 50 trim TO4E, 3" inlet polished comrpessor housing, .63 stg II exhaust, homemade 3" swingvalve with downpipe, large can wastegate actuator w/ TU Z bracket. Exhaust housing and swingvalve are ceramic coated. The turbo needs to be rebuilt and a new compressor wheel installed as the fins are bent. $350 FOR ALL OF IT! Have a badass hybrid for hundreds less with all the goodies.
-Dual core TD intercooler. 3" inlet/outet. My personal car just made 370 whp and 395 wtq on pump gas using this setup. 2.25" piping setup to utilize hybrid turbo on TU's header (slight tweaking of the lower pipe will be needed using a stock manifold to get behind the head a little, no biggie) in an L body with a T2 G body radiator. Upper pipe has a flange for a TiAL 50mm bov on it. I am not including the BOV unless you absoloutley demand it and are willing to pay for it. You could buy the knock off ones online if you want to be cheap. Intercooler with piping $200. W/O piping $150
-2.5 CB with crank, main seal covers, water pump, flexplate, torque convertor. All from a turbo car. I bought it for a spare main seal cover and didn't even use it. You can have all of this stuff in one piece for $50!!! Just come pick it up in Rochester, MI 48306. When's the last time you saw a common block crank for $50 alone?!
-Busted A555 getrag. Second gear probably has some decent damage as it is very hard to engage. $125. With A555 shifter and cables for a G body, $175 even. I may even ship it, BUT, I'd rather not. It's located in Findlay, OH.
You can email me at GTSturbo@comcast.net or PM me here. Thanks!
Aaron Miller
-Turbonetics Super 50 trim TO4E, 3" inlet polished comrpessor housing, .63 stg II exhaust, homemade 3" swingvalve with downpipe, large can wastegate actuator w/ TU Z bracket. Exhaust housing and swingvalve are ceramic coated. The turbo needs to be rebuilt and a new compressor wheel installed as the fins are bent. $350 FOR ALL OF IT! Have a badass hybrid for hundreds less with all the goodies.
-Dual core TD intercooler. 3" inlet/outet. My personal car just made 370 whp and 395 wtq on pump gas using this setup. 2.25" piping setup to utilize hybrid turbo on TU's header (slight tweaking of the lower pipe will be needed using a stock manifold to get behind the head a little, no biggie) in an L body with a T2 G body radiator. Upper pipe has a flange for a TiAL 50mm bov on it. I am not including the BOV unless you absoloutley demand it and are willing to pay for it. You could buy the knock off ones online if you want to be cheap. Intercooler with piping $200. W/O piping $150
-2.5 CB with crank, main seal covers, water pump, flexplate, torque convertor. All from a turbo car. I bought it for a spare main seal cover and didn't even use it. You can have all of this stuff in one piece for $50!!! Just come pick it up in Rochester, MI 48306. When's the last time you saw a common block crank for $50 alone?!
-Busted A555 getrag. Second gear probably has some decent damage as it is very hard to engage. $125. With A555 shifter and cables for a G body, $175 even. I may even ship it, BUT, I'd rather not. It's located in Findlay, OH.
You can email me at GTSturbo@comcast.net or PM me here. Thanks!
Aaron Miller