- Interior: Clips that hold HVAC cables to bracket
- Electronics: WTB/WTT: 90-91 3.0 V6 auto computer
- General: WTB: Under tail light molding and side molding, J body.
- Interior: Shadow/Sundance rear seat pivot bolts needed.
- General: Wanted: TIII Radiator
- Interior: 84 Rampage Windshield Chrome Trim Piece
- Exhaust: Shelby Lancer parts needed to finish restoration!
- Suspension: 2003 PT GT front springs
- Engine: Non common block front crank seal retainer
- Turbos/Intercoolers: WTB Garrett .48 exhaust housing cut for stage II turbine
- General: 89 Chrysler Lebaron hardtop Mirror housing
- Suspension: Need two Dodge Omni GLH Steering Knuckles
- Suspension: Rampage rear leaf shackles
- Interior: 87 P body seat tracks.
- Engine: Crank timing gear - common block
- Engine: WTB: TIII oil fill cap
- Engine: Shelby valve cover
- Engine: L body front motor mount
- Suspension: Tie Rod Ends?
- Interior: WANTED: 1989 Dodge Spirit Steering Wheel
- Interior: Chrysler T&C grill 1988-1990
- Electronics: WTB: Bulkhead connector pins/wiring
- General: GLH Air Box
- Engine: Modified T1 log manifold
- Engine: 1993 up ac hose ends at compressor
- Engine: T2 rods and pistons
- Interior: Turn signal stalk
- Interior: WTB: 1986 L-Body AC Controls
- Engine: WANTED: Spirit R/T Radiator-intercooler Assembly
- Engine: WTB good used 86-87 2.2 T1 short block or long block
- Engine: 2.4 dohc TD distributor adapter & sparkplug wire.
- Engine: T3 Rockers with damaged rollers
- General: P body door trim
- Exhaust: Muffler hanger
- General: '89 csx-vnt computer (prefer stock and known working)
- Engine: +.030 pistons
- General: 87 CSX outer window trim
- Engine: 2.5 turbo Short or Long block preferably forged.
- General: Exterior Trim
- Engine: Wanting to buy direct connect supercharger kit
- Transmission: A568 Crossover Cable Needed
- Engine: Looking for a/c delete bracket for 83 dodge shelby charger
- Engine: Tlll Head
- Wheels / Tires: looking for 4 lug mags
- Turbos/Intercoolers: Good T2 turbo
- General: I need help....gear shift (PRND) indicator cable
- General: I NEED 87 88 89 Daytona le baron Digital Dash cluster
- Engine: T3 engine parts/ sensors
- Transmission: flywheel/ pressure plate bolts
- Fuel: Fuel fuel tank wiring & fuel gauge sending unit late style
- Interior: 89 Dodge shadow Steering Wheel
- Electronics: DRB2 wanted
- Interior: Wanted: Spirit R/T interior piece
- Interior: wanted a sunroof headliner
- Interior: I NEED digital message center, daytona lebaron
- General: 91 Spirit R/T parts needed
- Engine: 2.2 common block/ Npr intercooler
- Engine: 2.5 turbo rods
- General: WTB Two Omni Headlight bezels
- Engine: WTB: TIII thermostat housing studs
- General: WTB: GLHS throttle cable
- Turbos/Intercoolers: Upgraded turbo II turbocharger 87-89
- Electronics: Power module 86 dodge omni turbo
- General: 1989 Omni auto axles
- General: WTB '89 Shadow/CSX hood
- Transmission: A525 Cam and Pawl Limited Slip
- Suspension: Looking for '89 Shelby Daytona Knuckles
- Engine: Oil distribution block needed
- Wheels / Tires: WTB 4 Center Caps
- Turbos/Intercoolers: WTB: 89 T2 Turbo complete
- Interior: Neon or PT cruiser...
- Transmission: WTB: shifter cable bracket for A568/A523
- Transmission: WTB 17 Spline Clutch
- Engine: 89 2.2 turbo 2 pistons
- Interior: L-Body Interior Trim needed
- General: 91 Spirit Rear Bumper Belt Molding
- Turbos/Intercoolers: WTB: TIII BOV, tube, hose
- General: 2 Door Shadow door trim piece.
- Electronics: Smec
- Fuel: Need 80ish pound injectors and 400 pump
- Exhaust: WTB Tubular header for 8v T3 flange
- Engine: WTB: 2.2 Connecting Rods
- General: WTB: Shadow door channel window runs
- Engine: Common block
- General: 88-89 Hbody Instrument cluster
- Engine: Need L-body engine wiring harness Tii preferred
- General: Need Fuel Rail Harness 4368368
- General: I BUY 87 88 89 Daytona le baron Digital Dash cluster
- General: HEP and ASD
- Engine: Minivan front motor mount
- Engine: 2.2L Distributor
- Engine: 2 piece intake for 655 head
- Electronics: Wtb 91 5spd sbec
- Exhaust: downpipe for a holset in an L body
- Suspension: Camber Bolts and Spacers
- General: WTB: Dodge Spirit Fog Lamps
- Electronics: infinity tweeters /speakers
- Engine: Direct Connection Supercharger Setup
- Interior: Beat Omni Front Seats Wanted
- Wheels / Tires: 5 lug Pizza wheels
- Transmission: 523/543/568
- Engine: WTB TIII rebuildable cylinder head
- Engine: in search of Turbo Caravan engine harness
- Suspension: 91+ knuckles
- Engine: Fm505 or other high lift camshaft.
- General: Looking for 85 DC/Mp stage II computer P4349743 and 84-89 minivan 14" caliper adapter
- Engine: T3 Rocker Arms
- Interior: Early style 3-spoke euro wheel, Leather Blue or Black
- Interior: Wanted - 1984 4 spoke steering wheel for daytona turbo z -any color
- General: T1 Log Solenoid Pack
- Interior: shelby charger seat track
- Turbos/Intercoolers: WTB Garrett oil drain tube and bolts & Knock sensor
- WANTED ; '84 Daytona 4 spoke steering wheel -any color but prefer dark red
- General: 568/523 main shaft bearing/sleeve
- Wheels / Tires: wanted 2 swiss cheese rims 4 lug 40 hole
- General: Rampage rear bumper with end caps
- General: WTB 87-88 CSX Grille
- General: WTB: Lebaron J Body power antenna
- Engine: Spirit R/T Dipstick and Dipstick Tube
- Electronics: Looking for a Socketed smec
- Engine: Dipstick Tube
- Fuel: Need good clean Fuel pump hanger assembly (don't need the pump)
- Engine: Alternator
- General: WTB 92-93 Rear Daytona bumper Support
- Engine: TIII stock valve spring retainers
- Engine: Alternator bolt with spacers for ND alternator
- Engine: T2 Oil pick up tube mounting stud
- Suspension: WTB 93 daytona rear crossmember under car
- General: Wiring Harness
- General: Pulley
- Electronics: WTB NOS Battery and/or Charging harness for GLHS Charger
- Engine: WTB- 44mm intake valves
- 12 pin connector
- Engine: WTB swirl head +1 exhaust valves.
- General: WTB l body dc hood scoop
- General: Wtb: 89-91 daytona driver fender es/shelby
- Electronics: Looking for an 89-90 SBEC
- Electronics: Wtb: 90-91 sbec
- Fuel: Need fuel rail for 2 piece manifold
- Suspension: WTB 91-up front knuckles
- Engine: 93 and later ac fittings for compressor
- Suspension: WANTED: Front Koni Struts for Lancer
- General: Wanted l body charger glhs out side door sweeps/scrapers
- General: WTB 93 daytona rear disk brake shields
- Engine: T2 Airbox
- General: Need a horn pad
- Transmission: race torque convertor
- Suspension: Koni's
- Transmission: 3.77 ring and pinion
- Transmission: WTB a543 transmission
- Electronics: TIII Crankshaft Position Sensor
- Suspension: bushings
- Fuel: Looking for a set of flex fuel injectors with rail
- Transmission: Wtb: A555 mtx
- General: WTB 52 MM Throttle Body for a 87 CSX
- General: 2.5 TIII Pistons
- Turbos/Intercoolers: Radiator and intercooler combo 90 Spirit
- Exhaust: WTB: TBI Header or Mexican Manifold
- General: Bmf intake
- Engine: Fidanza adjustable cam gear
- Engine: WTB Aluminum TBI Valve Cover
- Suspension: WTB...springs and struts
- Fuel: Looking for +40 Injectors
- Fuel: stock injectors
- Electronics: Wanted: L-body TBI pump/sending unit plug
- Transmission: WTB: 1.05 Transfer Gear set
- Electronics: Super 60 computer
- Electronics: WTB Boostbutton Flashable SMEC and bootstrap cable
- General: Looking for a Spirit R/T trunk spoiler
- General: 87 CSX wheel well splash guards
- General: drivers side front fender for 87 csx and front bumper cover
- Turbos/Intercoolers: T2
- General: shadow/sundance rear hubs
- Electronics: 89 cal
- Interior: 91 Spirit R/T
- Fuel: WTB: +40 injectors
- Transmission: Torque converter
- General: DaytonaTurbo T1 SBEC Wiring Harnes Needed
- Suspension: koni coilovers
- Engine: Torque plate
- General: 87 T-I throttle position & ais
- Electronics: 89 SMEC turbo 1 ECM needed
- General: Stock Map Sensor & Shift Lever
- Suspension: Mini van caliper brackets
- Suspension: Eibach springs
- General: WTB: '88 P body rear bumper brackets
- Transmission: Caravan stick parts
- Electronics: 3 bar sensor and engine parts
- Interior: Need Center stack BEZEL(black) for 1991 Shadow P-body for a Turbo car
- Interior: 1991 Shadow CONVERTIBLE molding needed
- General: rampage REAR bumper WANTED or omni one will do
- General: 93 94 Spirit es rear bumper cover
- Transmission: WTB: A525 Steel Differential Cover
- General: 1991 Daytona exterior door handle? Drivers side needed.
- Wheels / Tires: WTB: L body manual brake pedal, and master cylinder brackets
- Electronics: Data Cable for MPScan
- General: A/C condenser for 85/87 Dodge Shelby Charger
- Electronics: WANTED GLHS FAN, plus SHROUD AND BOTH RADIATOR BRACKETS FOR MOUNTING RADIATOR
- Transmission: 3.50 gears for a523
- General: socketed logic module
- Engine: WTB: broken TIII head
- Engine: chrysler 78 amp alternator adjuster bushings
- Electronics: Glowshift Red Digital Transmission Gauge
- Engine: WTB Dipstick tube
- Electronics: 89 Daytona cruise control
- General: 85-90 omni front fenders
- General: DSS axles lbody
- Electronics: WTB: 150 MPH Cluser
- Electronics: WTB: Lebaron digital gauge cluster (84 is my year, not sure what years work)
- Interior: Seat belts
- Electronics: Super 60 Computer
- Electronics: Looking for a turbo SBEC
- Transmission: Clutch-cable bracket
- General: A/C basic unit; engine adapter; fast idle kit wanted for 1983 plymouth scamp gt fwd p
- General: Spirit hoodliner and cowl panel
- General: WTB weatherstrip for left door - '89 Lebaron Coupe
- General: Shelby lancer parts needed
- General: 86 shelby charger quarter panel
- Electronics: Computer/ iroc rt
- Electronics: Looking for a Socketed SBEC for 1989 Lebaron
- General: 91+ Spindles with removable caliper brackets
- Turbos/Intercoolers: Factory L-body intercooler
- Interior: Interior map light
- General: Spirit R/T steering wheel in nice shape
- Interior: Looking for a Spirit power seat track.
- General: Wanted: A555 shifter for '88 lancer
- Transmission: More Transmission-Swap Parts Needed...& UD Pulley
- Electronics: concealed headlight control module
- Electronics: 4312664 Door Chine
- General: 89 mini hatch
- Engine: 2.2 STD floating pin pistions
- Engine: Tall Deck 2.5 N/A Short Block
- Transmission: A523 mainshaft and ring gear
- Engine: WTB: Direct Connection 8v valve cover
- Engine: Looking for 2pc lower
- Interior: 2 door l body front seat belts
- Electronics: 1989 SMEC Turbo 1 Automatic 2.5L
- General: somebody wanted a Lengal plenium ???
- Interior: WTB: P-body clutch/brake pedal assembly
- Electronics: WTB Outside temp sensor for '89 Lebaron GTC
- Interior: L-Body Upper Console Bracket
- Transmission: Intermediate bearing support bracket for 555 trans setup
- Interior: Dodge Omni console
- General: 2 piece intake lower ported for a 655 head
- Engine: Flywheel bolts...again
- Transmission: The right shift cable
- Interior: J-body Lebaron 5-speed Boot Trim
- Electronics: I NEED ECU for 1989 Dodge Daytona 2.5L Turbo Automatic
- General: WTB: Lancer Header Panel and Grill
- Engine: ISO: built TII cylinder head OR all the bits to do it myself.