View Full Version : Parts Wanted
- Transmission: Wanted: bronze shift fork pads if available.
- Engine: rear cam cover
- General: Wanted 3 gauge A pillar pod for Omni
- General: Wanted Omni rear windsheild wiper arm
- Suspension: Looking for 89+ Shadow, Daytona Front spindles with bolt in bearings.
- General: Center caps for crabs and pizzas, ac idler assy for 86 Daytona
- Interior: WTB: Enthusiast Seat skins
- General: Need Bolts Bolts and Bolts
- General: WTB: 1987 Shadow Hood in great shape, w/ turbo bump near Milwaukee, WI
- Suspension: Need 89+ K frame
- General: Clip on "nut" for transmission mount through bolt
- General: 88 CSX-T Whitter underhood decal/plaques
- Interior: Shadow / CSX parts- Interior and radiator
- Wheels / Tires: WTB Set of 15" Pumper Wheels
- Transmission: shifter cable 523/568
- Engine: Intermediate shaft oil seal retainer
- General: Rear Bumper Fascia (cover) P-Body
- General: looking for daytona odds and ends
- General: WTB: Omni 2 gauge A pillar pod
- Engine: Need an L-body front motor mount
- General: L-Body Louvers
- Engine: T1 air inlet adapter
- Suspension: ball joint bolt
- Engine: WTB common block bare block
- Interior: ISO: '85 Dodge 600 console armrest
- Turbos/Intercoolers: Wanted: old-school Spearco L-body intercooler kit parts
- Fuel: Accufab AFPR
- Turbos/Intercoolers: Wanted: stock intercooler mounting brackets
- Transmission: WTB: '95-'99 Neon (1st Gen) 31th, 3-speed auto shifter
- Turbos/Intercoolers: t2 garrett turbo
- Engine: Iso cheap/free a/c bracket
- Electronics: Wtb 1991 t3 sbec
- Transmission: Shift Cable for 520/555 J Body
- Interior: 87 CSX parts
- Wheels / Tires: 16 inch pumper wheels
- Transmission: 6 bolt flywheel
- Electronics: I NEED 87 88 89 Daytona le baron Digital Dash cluster
- Engine: 782 head guts
- Electronics: Turbo Shadow engine wire harness
- Suspension: I need a Rear Axle Assembly for a Shadow
- Engine: Performance cam
- General: front engine mount
- Wheels / Tires: daytona/glh wheels
- Engine: WTB: 2 piece stock manifold, upper only
- General: strater heat sheild, oil baffle for head
- Engine: WTB: TIII Valve covers.
- Interior: CSX Interior Panels
- Transmission: Transmission wanted
- General: transmission pump
- Wheels / Tires: Shelby Lancer wheels
- Electronics: WTB 89-90 VNT SBEC Module
- Suspension: Steering column jacket assembly for 89 Lebaron
- Fuel: Wtb: +40s and 3bar
- General: Need 88 Daytona Windshield
- Exhaust: Muffler bracket for 88 Daytona
- Interior: Omni Window track bushing/guides?
- Turbos/Intercoolers: Ready to bolt on performance T2 turbo
- Suspension: 89 Caravan rear hub
- General: Omni Hood, Good condition non-GLH
- General: WTB: 86 Power Module, 89 T2 computer, srt4 wheels
- Fuel: ISO: Fuel Rail for 2-piece intake.
- Turbos/Intercoolers: 2 piece fuel rail and Ready to bolt-on Performance T2 turbo
- Suspension: L Body 11" Brakes
- General: 1989 Daytona Shelby CV shaft circlip for 'England 4505769 - 769'
- Electronics: Need a working computer
- Suspension: WTB: ZF plastic PS pump!!!
- Engine: need pistons
- Engine: WTB- 44mm intake valves for G head and oversize seats
- General: 1988 dodge omni hood hinges
- Engine: 1989 Turbo II 'C' piston wanted
- Engine: T2 Common Block engine
- Suspension: WTB spindles
- Electronics: 94 3.0 604 PCM. Shadow/Sundance. Caravan too maybe?
- General: WTB 1986 Dodge Aries wagon tail lights
- General: WTB 1986 Dodge Aries wagon rear bumper mounts.
- General: AC Decal Needed
- General: Looking for Dash Plaque CSX-T
- Transmission: WTB: Bad Auto Transmission, a413/31th, located in NJ
- General: 92-93 Dodge Daytona Bumpers, Hood, Trim
- Suspension: WTB: 91+ ABS Spindles/Knuckles
- Engine: ABS System
- General: Need window for my C/V Caravan
- Electronics: 1992 Spirit R/T 16v Engine Harness
- Turbos/Intercoolers: WTB radiator and intercooler 87-89 Daytona
- Turbos/Intercoolers: "'WANTED'" complete intercooler set up
- Interior: wanted 89 daytona int parts
- Electronics: headlamp control module
- Engine: Ported big valve head
- Engine: WTB: dipstick tube
- Fuel: WTB: fuel injector harness
- Interior: 150 MPH Spirit R/T Cluster
- General: L-Body auto trans mount
- Electronics: 85 glht engine harness
- Engine: 81-85 2.2 Forged HD Pressed Pin Rods
- Fuel: WTB: +20% Injectors and 3bar MAP sensor
- Engine: .46 hybrid/ IC&tubes/ TUNE/ 3BAR/ Injectors +/Walbro 255/ Performance Clutch
- Engine: WTB 5 bolt timing gear & cast timing cover
- Interior: ISO Daytona front seat belts
- Engine: T3 cam wanted
- Engine: rear engine support bracket.
- Wheels / Tires: Needed 1 86 glhs centurion
- General: Need right side mirror for 1990 Daytona Shelby
- Electronics: 1994 Dodge Ram Van AM/FM Cd player radio wanted
- Exhaust: VNT Nickel Manifold
- Engine: 1989 T2 2.2l motor complete needed
- Transmission: Need a520/a555 diff shims...
- Transmission: Speed sensor gear
- General: ZF pump pulley
- General: 1990 daytona door latches
- General: 3 wire Speed Sensor with pigtail.
- rt/ tail lamp 1986 dodge omni & side markers and starting rod.
- Engine: 1989 2.5 turbo crank sprocket
- Engine: WTB: custom or different TIII valve cover
- Engine: wtb Common Block or tIII block
- Interior: need headlight knob for Chrysler TC by Masi.
- Engine: 2 piece intake trade for items I have
- General: 1988 caravan/daytona exterior door handle
- Wheels / Tires: WTB 16" original "ninja rims" for 92 daytona
- Wheels / Tires: Pizza wheel center cap's
- Turbos/Intercoolers: .63 Ford 5 bolt Turbine Housing (whole turbo)
- Interior: Wtb black Daytona rear cargo cover
- Electronics: WTB Latch Board
- Exhaust: 1988 daytona muffler bracket: part number 4427676
- Turbos/Intercoolers: WTB Early T1 Spearco Intercooler Kit
- General: T3 Turbo III Radiator Wanted
- Interior: 1989 Dodge Daytona interior parts needed (USA cars only with bubble dash)
- General: Looking for a Passenger Side Mirror for 1985 Shelby Z
- Interior: GLHS center console
- Fuel: WTB: +20% or +40% injectors
- General: Looking for a power steering pulley. VF pump (plastic reservoir)
- Engine: 2 piece intake wanted
- Engine: WTB-Connecting rods
- General: Wanted: 1986 Daytona CS Parts
- Fuel: Performance Mod WTB: BIG LowZ injectors 96lb/hr or 120lb/hr
- Interior: Looking for black leather interior for 85 Daytona
- Engine: 4 Door L Body AC Condensor
- Transmission: wanted A-568 steel plate
- Engine: WTB: PT Cruiser lifters and shims
- Transmission: A525 Transmission Bracket from L-body/Charger/Omni/Horizon
- Interior: Wanted 5speed minivan pedal box
- Electronics: WTB: 1988 Turbo P Body Underhood Harness
- General: Spirit R/T White Fender Molding
- Needed two piece intake or custom 1piece
- Interior: Shifter lift collars wanted
- Engine: Csxt hood and two piece intake with 52mm throttle body and fuel rail
- General: Gauge cluster lens (clear plastic window) needed for 88 Lebaron
- Engine: Piston
- Engine: TIII used Venolia pistons or other brands...
- Interior: 1989 LeBaron GTC Coupe Taupe Door Trim Panels wanted
- Wheels / Tires: Wanted: Forged Rims 15" TrakLite or Similar
- Engine: Ported Big Valve Swirl Head
- Interior: WTB: Rear Cargo Cover for Dodge Daytona
- General: Seeking L-Body hood prop rod AND hold-down clip
- General: 91 or 92 Dodge Spirit R/T Grill
- General: Looking for 87 CSX coolant recovery tank
- Engine: 88 TBI roller cam with followers
- Electronics: 86/87 GLHS logic module
- Interior: Wtb: 1992 spirit r/t 200 mph speedometer
- Engine: Common Block water pump housing
- Engine: 2 piece intake manifold
- Engine: WTB: Turbo II air box and intake/intercooler hoses
- Electronics: WTB: Shelby Charger harness
- Transmission: WTB: Speedometer cable for Spirit RT
- Suspension: 89-90 G,J body or 91+ G,J,P body spindles.
- Engine: WTB-2.5 TIII pistons
- Engine: Looking for RWD turbo intake and exhaust manifolds
- Engine: 2.2L A/C Compressor/Alternator Bracket
- Electronics: 91 or newer turbo car wiring harness and PCM
- Fuel: Needed: roll over valve and grommet
- Fuel: hybrid pistons
- Interior: WTB: Spirit 2 Gauge Pillar Pod
- General: T2 radiator
- Exhaust: N/A exhaust manifold
- Engine: 86 2.2tbi auto Logic module
- Turbos/Intercoolers: Oil line fitting for turbo line
- Interior: Spare tire well parts
- Interior: MiniVan Parts Wanted
- Engine: WTB: two intermediate oil pump/distributor shafts
- Wheels / Tires: WTB Ninja Rim IROC R/T Center Caps
- General: Rampage body
- Engine: WTB: G-Head +1mm Valves???
- General: Oil Cap
- General: Need help locating a post
- General: In search of 1987 charger inner sunroof seal
- Engine: Need late alternator bracket hardware
- Engine: 2.2 Turbo complete head, cam, and valve cover gasket
- General: Needed: Shelby Lancer trim parts....
- Electronics: SC LM 40 pin male bulkhead connector with pins
- Engine: T3 cam retainers
- Interior: 1984 Dodge Omni rear view mirror
- Suspension: Need 91 and up shadow knuckles
- Electronics: WTB: T3 engine computer (stock or FWD 3 bar cal.)
- General: Glh omni brakes complete with hubs and spindles, etc
- Interior: Glove box
- Transmission: 88 omni manual clutch quadrant/pedals
- General: 1990 daytona misc parts
- Turbos/Intercoolers: TII Airbox Wanted
- Transmission: '89 A555/early a568 parts
- General: PCV Hose - 1982-1983 Rampage/Scamp
- Suspension: L body Rear Axle - Long Shot
- Engine: Looking for a cam
- Interior: Caravan or Voyager 3rd Row Seat
- Turbos/Intercoolers: Stage1 .63 AR chrysler pattern turbine housing and 2.5" or 3" swingvalve
- General: '84-'87 4 headlight L body hood
- Engine: T2 bottom end
- Engine: AC tensioner bracket
- Electronics: 92 premium bcm g body
- NEED ENGINE ASAP!!! Michigan
- Engine: NEED ENGINE ASAP!!! Michigan
- Transmission: 6-bolt Turbo Flywheel
- Transmission: A555 Case
- General: ISO L body manual steering rack coupler
- General: ISO a/c delete bracket.
- General: 86 Shelby charger air box needed
- Interior: '87 Shadow speaker grill and Daytona seat tracks
- General: P Body Hellas
- Interior: Looking for window nuts for omni
- Interior: driver door upper plastic any color for dodge omni
- General: WTB-Rear washer nozzle
- General: WTB: Heat & Transmission Shields/ Large Spline Clutch & More
- Electronics: Looking for an MP computer for my 89 2.5 manual trans
- General: Early L body door handles
- Transmission: 89 A520 intermediate shaft and ring gear 3.50 ratio
- Interior: Seats wanted
- General: ISO coolant overflow bottle and door peice
- General: ISO hood hinge
- Interior: WTB: L-body floor pans rocker panels..... Pick up at SDAC
- General: P Body Belt Line Moldings Door/Fender Trim
- General: 84 lebaron tailligt
- Wheels / Tires: ISO plain center hubcabs - please see pictures
- Interior: WTB 1991 Shadow driver's side adjuster ratchet for recline
- General: WTB: Gray convert boot for a 1991 Shadow
- Turbos/Intercoolers: 2.5" swingvalve for my Garrett
- Engine: 3.0 V6 Intake plenum Spacers WANTED
- Transmission: A520
- General: WTB: 87-88 CSX or Shadow ES Grill
- Turbos/Intercoolers: Wtb gt3071r-wg
- Transmission: A523 side pan/cover
- Engine: 91+ AC bracket/tensioner and good pump
- Engine: lower timing belt cover
- General: Rampage rear bumper end caps
- Transmission: 523 trans shift lever NEEDED
- Electronics: 84-89 Daytona/Lebaron boost gauge
- Transmission: Transmission mount needed
- Transmission: 2004/2005 srt4 transmission
- Fuel: Wanted: Omni FI Fuel tank Hanger assembly.
- Engine: F series camshaft, F2.F3.F4
- Transmission: 3.50 FD A555 Hybrid
- Engine: 1989 2.2 Common Block
- General: Omni side mirror brace/support thingy.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.