View Full Version : Parts Wanted
- Interior: Parts Required
- General: Driver's Mirror for Rampage or similar L-body
- General: Door handle
- Interior: GLH/S silver seats, carpet, door gaskets and outer door trim piece below window
- Electronics: 85 L body LM PINS!!!
- Electronics: WTT: 12 button Nav for 12 button nav.
- General: Anybody parting out a Spirit ES or R/T???
- Interior: WTB: Driver Seatbelt, Black 90+ Daytona (URGENT)
- Engine: CB 2.2 Crank (Cast or Forged)
- Engine: WTB: 2.4L 03-05 SRT4 Shortblock and Crank
- Engine: Needed: 2.2L 89+ Common Block oil pan. Preferrably close to Atlantic Canada
- Turbos/Intercoolers: need a mitsu turbo!
- General: Need a downpipe thats modded for a holset to use in spirit r/t.... have one lol?
- General: Front ground trim '89 Lancer Shelby
- Interior: parts for aries/reliant
- Interior: 91-95 Lebaron Cntr Console (stick)
- Engine: Lower Timing Belt Cover for Common Block
- Engine: WANTED! Turbo Valve Cover Oil Baffle WANTED!
- Interior: 92-93 G body leather drivers seat
- General: Need CSX-VNT Grill ASAP
- General: Louvers for an 85 laser
- Fuel: Throttle Body
- General: WTB: S-10 Airdam (Air Deflector)
- General: Need shelby lancer ground fx
- General: WTB Left Rear door/trim from Spirit or Acclaim at SDAC
- Transmission: L body shifter conversion for 555 trans
- Engine: WTB 2.5 turbo short block
- Interior: Slave CD player brackets
- General: Shelby Charger carbon fiber side air dams
- Interior: k car passenger side seatbelt
- Engine: URGENT! Need lower timing belt cover for 2.5 common block!
- Fuel: Wanted: AIS for 84 Daytona
- General: Daytona Front Plate bracket
- Fuel: Fuel pump/sending unit assemble 87 shelby charger
- Transmission: intermediate axle shaft
- Wheels / Tires: Wanted: 1 Fiberide (Nice Condition)
- Electronics: Wanted late t1/t2 smec
- Transmission: Rwd parts wanted.
- General: Omni bumpers (pickup at SDAC?)
- Transmission: A568..
- Transmission: A568..
- General: Plastic power steering pump
- General: t-lll snorkel!
- Engine: Needing a few thngs...
- General: LeBaron Parts wanted SDAC pickup
- Wheels / Tires: Needed, Two free Donut spare tires, G/J body, Will be at SDAC
- General: WTB: Quarter glass 1988 Daytona
- General: Carb. performance parts wanted
- General: need parts for 88' turbo lebaron and 87 new yorker 2.2 turbo
- Transmission: WANTED: 5spd trans mount 89 and older style
- Engine: wiring harness
- Electronics: 87 T-II knock sensor harness
- Transmission: 523/568 large spline wanted
- General: 90 shadow ES trims/moldings
- Electronics: WTB: 87 TII LM non
- Transmission: Wanted 5 speed shift cable
- General: Wanted Throttle and cruise cable attachment bracket
- Engine: V6 engine harness
- Engine: TIII and t1 parts needed
- Transmission: drivers side cv axle for a 90 omni
- Interior: Speedometer for '89 Lancer Shelby!
- Interior: seat belt buckle
- Electronics: Wtb
- Engine: TIII wiring Harness, Cryo I-shaft
- Interior: '89 spirit steering wheel
- Interior: Grey seat belts (LeBaron front) Carlisle pickup
- General: WTB tIII Accessory serpentine belt tensoner
- Wheels / Tires: Wanted --- wagon wheel center cap needed
- Electronics: 120A bosch style alternator
- General: WTB: Rampage rear taillights
- Engine: WTB: TIII Ajustable Cam Sprockets
- Electronics: Wanted! Dig heater control for 86 New Yorker.
- General: WTB: Spirit RT Spoiler
- General: Windshield moulding
- Transmission: WTB: Unequal length axles for 87 Daytona Shelby-Z
- Engine: kd 3087 valve spring compressor
- General: Kelsey Hayes Caliper Brackets
- Fuel: WTB TII or late TI throttle cable, +20% fuel injectors
- Engine: WTB: Engine (Turbo)
- General: Direct Connection Valve Cover
- Turbos/Intercoolers: large can wga
- Engine: shelby valve cover
- Suspension: WTB: NEW or USED SRT-4 Coilover Kit Level 2
- Transmission: WTB: 1st Gen Neon 5-Speed
- Engine: WTB: 420a Cylinder head - complete
- Transmission: Need trans mount!
- Wheels / Tires: Need 4 Lug Hubs!!
- Engine: WTB: Complete 2.2 short block
- General: AC hoses for 10pa17c compressor
- Electronics: WTB 86 SC Wireing harness
- Engine: Front engine mount for turbo daytona
- Engine: WTB: 2.5 engine or Long block
- Exhaust: T3 exhaust manifold...
- Engine: WTB: TIII crank gear "sprocket"
- General: Wanted: H-body Lancer Grill (Shelby)
- Electronics: 92-up V6 5-spd starter/transmission harness
- Fuel: Wanted 1991 Daytona Fuel Pump
- Turbos/Intercoolers: I am looking for a stg 2 intercooler for srt4
- General: WTB A/C Compressor, was AC hoses..
- General: Need a Shelby Charger rear bumper with brackets
- General: WTB: Header panel, fender
- Fuel: needed one +40 injector
- Interior: WTB: 89 CSX Driver's Floormat???
- General: otc 7464 a crank shaft sprocket remover....and....kd 3087 ..a valve spring compressor
- General: WTB carb and performance parts!
- Electronics: WTB 90 Shelby VNT fog lights
- Transmission: Clutch Kit for Spirit R/T
- Transmission: WTB 555, 520, axles, cables and shifter
- Engine: WTB: 782 Cylinder Head for TII
- Engine: TIII Serpentine Belt Tensioner/Bracket
- Wheels / Tires: WTB turbo blade center caps
- Transmission: A-413 shift kit
- Engine: 1 SRT-4 piston/rod combo
- Interior: 87 Charger interior parts needed
- General: Shelby Charger drivers fender ext.
- Turbos/Intercoolers: WTB Decent turbo for 2.5 T1 project
- Fuel: need 88 t1/t2 fuel rail for one piece intake
- General: WTB 85 Shelby Charger Misc parts
- General: AA body fog lamp brackets.
- Exhaust: WTB A 2.5" downpipe for an 87 Shelby Z locally, Calgary AB
- Exhaust: TU header
- Wheels / Tires: WTB - Used 24.5x8x15" Mickey Thompson's
- Suspension: WTB: 5 lug front spindles
- Engine: Need a common block (1989) dipstick tube.
- Turbos/Intercoolers: Need a T1 to TII adapter
- Interior: 1st gen minivan mirror block off plate, interior.
- Transmission: Needing to buy a Getrag A555 transmission
- Engine: 2.2 CB parts needed
- Transmission: Shifter Cables!!
- General: Specific Mopar shop manual wanted
- General: WTB ASAP: Right side Charger/Turismo tail light housing
- Engine: TIII parts - belt idler bolt and PS fitting
- Engine: 2.4 Minivan Alternator Mount
- General: Looking for various parts
- General: TurboZ Tail Lights
- Engine: Front crank sprockets
- Transmission: WTB: 568 Shifter cable or cables
- Wheels / Tires: Set of 15" wheels.
- Wheels / Tires: 4x100 wheels wanted colorado or close
- Transmission: REVlok clutch disc.
- Transmission: 523 small spline
- Transmission: Some Hardware
- Electronics: computer for 97 breeze
- Transmission: Shadow/Spirit shifter cables wanted A-568 (cross-over cable)
- Electronics: 85-87 turbo power module
- Interior: Lebaron white leather bucket seat
- Interior: TC Maserati rear speakers.
- General: Need a clock spring for my steering colum for an 88 LeBaron.
- Engine: non-common block oil pan wanted
- General: TIII valve covers
- Engine: pistons .20 over t2 or better
- General: Looking for '92/'93 daytona iroc headlights and tail lights
- General: WTB: Parts for 1990 Voyager Turbo
- Transmission: TIII fly wheel in good shape ASAP
- Interior: WTB Passenger Door Armrest for 89 Dodge Daytona T-Top
- Engine: Need swirl port head
- Turbos/Intercoolers: garrett turbo
- Turbos/Intercoolers: Looking for Cheap inter-cooler/turbo
- Suspension: WTB GLHS Koni REAR Shocks.
- Engine: WANTED ASAP Turbo motor for Shelby CSX-T In oregon
- Suspension: Need a piece of an L-body strut
- Wheels / Tires: Wtb slicks
- Interior: Passengers Motorized seatbelt
- Exhaust: Looking for a 2.5 inch Garrett Swing Arm and down pipe.
- Wheels / Tires: 5 Lug Swiss Cheese Wheels
- General: Need body parts/effects for 87 Sundance 2 Dr
- Interior: Blue Omni interior panels
- Interior: Leather turbo z seats
- Turbos/Intercoolers: Stock t2 Garrett compressor housing
- Electronics: Looking for the center console switch assembly for an 88 Lebaron. It's a J-Body.
- General: WTB: Red snowflakes, gray floor mats for 91 spirit r/t
- Engine: wtb parts needed for 2.5 build up,forged pistons,arp head studs,ud pulley,al fw.
- General: Need a battery tray, Wilmington, DE preferable
- Electronics: Wanted DRB2 DRB II scan tool.
- General: Need a battery tray to fit 1989 Caravan
- Fuel: Rollover valve
- Electronics: Wanted DRB2 or DRB II scan tool.
- General: Air Cleaner to SBEC duct and cam key
- Interior: Looking for a 1988 shadow console door if anyone has one..
- Interior: 89 Daytona turn signal lever assembly.
- Electronics: looking for 88-89 2.5 manual transmission SMEC
- Electronics: T1 AIS motors 1984-87
- Engine: motor Parts for my mini build
- General: 6 bolt turbo flywheel
- General: L-Body mechanical speedometer cable
- Electronics: 87 T2 Logic Module
- General: Louvers
- Transmission: fidanza flywheel
- Wheels / Tires: Wanted (1) 88 shelby CSX-T center cap
- Turbos/Intercoolers: turbine housing for T2 garrett with standard T3 pattern.
- Engine: Plastic Guard that goes around the distributor
- Turbos/Intercoolers: T1 and T2 Turbo Cores
- Electronics: 1986 Speed Sensor
- General: 2 door l body doors
- General: A/C condensation nipple
- General: 86 NYer Rear Pass Chrome Trim Needed
- Interior: shelby recaros
- Wheels / Tires: In need of Pumper center cap(s)
- Transmission: A568, A555, A525 transmissions
- Transmission: Looking for a A555 or a A520 trans
- Fuel: omni gas tank
- General: Looking for Bumpers and side skirts for my spirit
- Fuel: Fuel sender
- General: need several parts for 88 shelby z
- General: L-Body NON-AC Dasboard Defroster Duct
- Electronics: 1991 Spirit TI engine bay wiring harness
- General: spirit window scrapers
- Engine: wtb,arp 11mm head studs,round tooth adj cam sproket,5 bolt cb underdrive pulley
- General: TII conversion parts
- Transmission: Manual transmission swap stuff... all of it.
- General: 46mm Tb for log intake
- Wheels / Tires: Slicks
- Turbos/Intercoolers: Any 2.5 inch swing valves for sale? Swing valve WANTED
- Electronics: 3 bar MAP sensor for 87 LM electronics
- Engine: PISTONS - New or BARELY used turbo pistons, Mahles or Forged.
- Electronics: lebaron vnt ecu
- General: GLH side skirt hardware/red center console arm rest
- Fuel: Turbo/V6 fuel pump
- Engine: Single JE 2.2L +.030 turbo piston wanted
- General: Turbo dodge Hood vents
- Engine: 86 omni wheel well plastics
- General: WTB 92-94 P-Body Disc brake prop valve
- Interior: 91+ dark pewter drivers door panel
- Transmission: 6 bolt flywheel, trade for +20's?
- Electronics: digital cluster odometer memory chip WANTED!!!
- Turbos/Intercoolers: T2 compressor housing and wastegate can and bracket wanted.
- Electronics: Dawes AFR and 3 Bar Map for 87 logic (csx)
- Electronics: I need a Digital Instrument Cluster
- Fuel: looking for a rail mounted afpr
- General: Interior - seat cover wanted, Caravan
- Interior: Wanted: 1987-1989 LeBaron (J-body) A-pillars
- Transmission: A-413 Conversion
- General: Knuckle
- General: Under hood insulation for Shadow
- Interior: Wanted: L-body non-AC vent block off
- Exhaust: Turbos Unleashed hybrid exhaust maniflod!!!
- Turbos/Intercoolers: Turbo Lines
- Electronics: 91 sbec
- Turbos/Intercoolers: Mopar SRT-4 Stage 2 Wastegate Actuator (Canada)
- Transmission: 520 2nd gear
- Transmission: 1987 Dodge Daytona Shelby Z Throttle Body Cable
- General: 85 LeBaron conv't bumper cover
- Interior: '90 Daytona seat belt
- Suspension: WTB PT cruiser knuckles
- Engine: Water pump pulley
- Interior: Daytona Turbo Z parts
- General: WTB: L Body FMM Frame Bracket, Minivan Caliper Brakets
- Transmission: Looking for A413 Valve Body
- Electronics: 2.5 t1 sbec injector harness
- Engine: Looking for complete 2.2 turbo engine w/ A520 transmission
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.