View Full Version : Transmission
Pages :
1
[
2]
3
4
5
6
7
8
9
10
11
- Tranny Mount?
- question about a413 valve body mod
- metal shavings in A555 oil
- To do list before installing 520
- Trans broke in the glhs, what to do, part it out?
- A523/A568 Shifter Into A Turbo Z
- Manual valve body?
- 523/568 Vs 523
- Oil filter=good trans filter?
- Line pressure mod in valve body and theory
- ARP flywheel & pressure plate bolts
- Can you cool an auto too much?
- A413 replament...
- Minivan clutch cable/Daytona the same?
- Trans mount bracket
- a couple of lockup tq converter questions
- Which dimple to use to make shifter cable holes?
- 2.2 Ring gear
- Questions around fitting an OBX in a 523
- Seriously pissed about OBX
- Kick down cable needed?
- Options for Diff. and Limited Slip
- Clutch cable misery
- What happens when you have a bad throw out bearing
- are all clutch cables the same equal length
- Does SRT4 LSD work with our manual tranny?
- stupid TO bearing
- mini auto prob
- anything to watch out for...
- Short throw in A525/3.56 to 3.87 gearset
- Anyone broken the low/reverse servo piston?
- What's a good torque converter?
- Clutch and input shaft (568)/aligning the clutch
- Sluggish shifter w/A525
- '90 N/A Daytona 5-speed....
- how come its doing that!!!
- decisions, decisions......
- My new RP 3 Puck Clutch! (Pics)
- Ford spring style posi link?
- What tools are needed to disassemble a manual transmission?
- So what's involved in a 5spd sweep?
- 523 vs 520
- clutch alignment tool
- cv axles?
- shift knob emblem
- Tranny time
- I broke some more transmission parts!!!!!!
- clutch Qs
- Does changing the transfer gears change the speedo reading?
- Half shaft for equal length
- another OBX pass axle no worky
- What Shifter to use for Minivan??
- removing ball joint from knuckle
- removing clutch cable
- Clutch Choice Help Please...!!!
- breaking in clutch
- speed distance sensor,unsure
- trans is out, removing pp,clutch,and flywheel
- early model shifters
- What Do You Guys Use For A Clutch...???
- clutch pedal adjustment Not working!!!
- removing throwout bearing
- Trans mysteries (many pics)
- input shaft
- best place to buy Drums/band/cluches a413
- how is a normal clutch pedal
- 523 shim questions , cables where to get?
- What Stall?
- 523/568 shifter cables, which are longer?
- Need Tranny Parts!!
- slipping
- better clutch
- Trans seals?
- Need part no. - speedometer cable
- TQ Converter Hitting Crank!
- Shift Cable Clips... Where To Get 'Em?
- Long bolt bobble strut for 555 in L-body problem.
- What ratio is my differential? (Picture)
- Shift position for A568 Shelby Lancer
- 568 ?
- Options for pass side L body 555
- tq ratings
- preload shims for OBX
- cheap LSD for 90 turbo1 shadow?
- It's time for a NAN torque converter
- Chronomoly Bearing plate install
- best axels to use?
- What clutch for an SRT4 engine and Neon 420A trans?
- High HP clutch
- 520
- A413 - V6 into a Turbo mini?
- 525 problems
- Need 555 Shifter Bushing
- A568 trans in l-body
- A525 w/3.87
- Rebuild on trans
- I's Done.....Finally
- custom shifter cables
- Before I install my 555...
- Fine, I wont half-@ss it this time
- issues with cromoly plate install HELP!
- What breaks flexplates on A413's?
- WTB; '87-'88 A520 shaft & gear
- Got my FWDP 4 Puck clutch today
- where do your clutch pedals "catch" at?
- 555 intall in an 85 SC ?'s
- Interest in aftermarket axles?
- A-413 maintenance
- Mobil 1 0r Tractor Hyd. Fluid In Automatics
- Clutch idea...
- Axle seals
- QUICK non turbo 520 the same?
- aftermaket a413 tranny filter?
- 89 shifter?/A555 gears good ratio 2.5?
- A413 not kicking down when stopping
- A520 hard to shift when cold
- rebuilt a413 slipping. too much fluid?
- LSD Inserts (QUICK! Opinions!)
- Hybrid questions and OBX
- ID a 89 520
- Can I use an A568 manual with a 2.4?
- rough shifting
- Charger bobble strut?
- no reverse.....
- any interest in a a413 LSD?
- A-413, is the 3rd design pump a good upgrade?
- Luk Clutchs
- Tranny Id!
- A555 Intermediate shaft bearing oil feeder
- Carnage (?) pics of Tranny... okay, 2 of them
- switchin between 525 and 555 small questions
- Specs for OBX/413 Spacer ???????
- Spools for the A413?
- half shaft length question
- A-525 experts: question w/ this pix
- Funnel for 5-Speeds
- A413-OBX steel spacer finished
- broke a t2 clutch/ other ?'s
- just re-checking, torque spec. TC to Flexplate
- Tranny cooler location, possible problems??
- Tried out new Trans Brake
- I beat this car up, is it easy to save.
- A404 casing different than a413 (holes lining up)
- bolts?
- Manual Transmission Lube Chart
- How do I make a neon 3 speed a turbo 3 speed?
- What stall should I go with?
- 525 to 520 Change shifter?
- 3.05 FD from a A525 in a A555?
- Need Bolts for OBX/A413 Spacer
- 86 tona ?
- What kills torque converters?
- Flywheel fitment
- Transmission?
- How does a 5 planetarey help?
- 4.10 gears!
- What a difference a new Torque Converter makes-changed the title due to Alan, lol!
- OBX LSD: 568 vs 523
- A-413 again
- Installing an OBX, what do I need to know?
- Transmission in 1990 3.3L Van
- 86 a413 in 89
- Will '87+ driveshafts fit an '84 Trans?
- A520 vs A555 casing
- window shifting
- Aluminum Flywheel on a VNT car. Anyone running one?
- RMVB with stock guts?
- 86 a413 Questions
- checking over tranny
- large spline A523 limits
- Tob Is A Little Noise
- how much oil to fill a 520?
- L Body Transmission Options
- Rear (forward) clutch drum won't come out
- What could cause this?
- cable shifted 525...
- OBX install in a 520? Also, is there a 520 rebuild manual??
- A568 Noises
- (6) Steel OBX ring gear spacers for sale
- 89 shelby daytona with a520...
- Clutches
- Is my torque converter okay?
- Titon PP and Flywheel Setup??
- OBX in an A523
- A568 Input shaft size
- External Tranny Coolers
- 523 swap into Spirit
- Flywheel ?
- F/I cluch choice
- Heads up on shipping trans
- shifts like an old truck!!!!!
- 5spd into a van (check list)
- Any bolt in LSD's for the A604 4 speed trans?
- Best place for trans temp probe!
- Easiest way to change gear ratios on A413?
- Momo Shift Knob. Which One Short or Tall?
- Welded A413 Diff?
- Throw out bearing making noise in neutral
- Flushing Fluid on the A413
- a555 or a523??
- 5-Speed to a A413 in an Omni
- A/T aftermarket shifter Q's
- A555 Parts
- A413 Improvements
- R/T clutch
- 555 any good after a fire?
- CV Axles
- I think it's time to change autos
- 523 questions
- OBX Where to buy
- use for this in the td world?
- l-body 523 swap....
- Need Help. Linkage
- What's the trick?
- A-555 owners answer me this plz!!
- Clutches anyone??
- Hybrid A525/A555
- Question, 604 problems in a 92 3.0 Duster
- How high and what is it on an 89 auto?
- Where to put pressure gauge port?
- transmission questions
- What transmissions will the 2.4 block bolt to?
- Anybody have experience with bobble strut brackets?
- SPEC stage 3 Clutch.... thoughts anyone?
- Can't hit the hole, and other problems
- Aluminum drum?
- a413
- sending out my parts to be treated soon need help with parts list
- 520's any good?
- Well, its a partial success
- Help! Adjusting Linkage
- How To Fit A 1990 Clutch and PP on a 1985 N/A Motor?
- Will it work?
- A568 5th gear question
- srt lsd
- Doesn't like 5th gear?
- Short Throws?
- Shift fork pads ?
- Torque Converter Bolts?
- Clutch options
- Cold A413 stays in first
- ratchet shifter
- A-568
- A568 rebuild?
- a520 tranny and clutch mod?
- tranny questions
- Trannys and computers?
- Installing a tranny cooler?
- ? about A555/520 hybrid
- a413 won't downshift
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.