- Boost issues?
- 2 piece porting question
- Intercooler cooling
- Tial 38mm wastegate Q
- Were to splice into for a Boost Gauge??
- Can I safely run 12-13 PSI boost on my 87 Turbo1?
- WG actuator adjustment
- T1 Swap from a 88 Lebaron. Is this all I need?
- fast spool turbo?
- Cheap BOV
- Turbo smoking, grrrrrrrrr!!!
- Do I need to notch my T1 Turbo for a T2 swap?
- What do you think about this intercooler?
- Anyone Running the Greddy Type RS BOV?
- Why did my 60 trim surge and how to fix it?
- Sorry-HX35 advice again!!
- Intercooler Plumbing
- choose a fast spool up turbo
- need a little info on turbos
- Wastegate Rod Weirdness
- Case of the Missing Air Filter
- HE351 boost control?
- Which tank profile ...
- picture request!
- R/T Turbo on a 2.5?
- 2.5" of 3" swingvalve which is better!
- WRX TD04 on a Turbo Mopar??
- questions about my s60?
- HE341 vs HE351?
- HE351 spotters guides?
- Where to buy Turbonetics parts?
- 30 psi plus nitrous
- Stock TII boost setting?
- Counterfeit Holset turbo destruction
- Holset rebuild sources
- Holset spool rpm vs housing size.
- Porting a Garrett?
- replacing T4 turbines
- New to It :: Shadow Turbo
- overboost with new wastegate
- Just bought a VGT Holset!!
- Turbo Choice...
- Turbo Info Goldmine
- Turbo failure, pics inside
- want an engine swap for 1994 dodge shadow es
- want an engine swap for 1994 dodge shadow es
- want an engine swap for 1994 dodge shadow es
- GT35R surging-what can I do?
- Which IC will be better?
- Grand National turbocharger
- TII Turbo Convert Question
- Getting 5psi on Turbo vac boost meter
- Garrett T3 Rebuild Trouble (Solved)
- will a GN 'S70' turbo mate to a Chrylser style turbine housing?
- Help needed. Which Holset should I buy?
- Grainger valve and Hybrid turbos
- 2.2/8 valve/Holset HX35. Will it spool?
- Ported shroud cover-more/less or the same lag?
- Questoins on running intercooler pipeing
- Were to mount my BOV???
- H1c
- Garett actuator fit a mitsu turbo?
- Turbo makes boost with wategate open?
- Do I NEED a TII wastegate for my TI to TII swap?
- Powerstroke garrett
- wastegate actuator spring tension
- GT30R oil drain adapter for T/3 - T/4 drain
- Need help ID'ing a Turbo
- MBC is it possible to use?
- SPRING adjustable wastegate actuator?
- Cool boost control
- How much shaft play is ok?
- Billet compressor wheels
- external gate help
- TII convert Wastgate question
- need shots of mini ic install
- DSM or RFL BOV options
- Going to go buy pipeing for the Intercooler what to get?
- Anybody running these intercooler cores?
- TII questions :) Air intake sensors and ect
- L body (Omni) intercooler hole
- turbo storage and swingvalve question
- Billet 62mm Precision Turbo Pics!
- BOV for TII
- hybrid turbo combination questions
- What needs to be done to drive my TII car hot air?
- Why can't I boost higher than 12 psi??
- what thread size is an O2 sensor??
- Chrysler turbo discharge flange need info
- AEM boost controller
- How to adjust boost 2-3 psi at a time?
- I cant get past 11 PSI, Why?
- Re-Calculating Turbo Maps
- anybody make oil feed line for 16V maserati TC IHI turbo??
- volvo ic - bov
- How do I reduce boost to almost 0 with an external wastegate?
- Knock off Greddy Type RS BOV question
- Knock off Greddy Type RS BOV question
- Getting a DBB Turbo Rebuilt
- oiling mitsu for fun project.....
- t-3 help turboing my snomobile choosing turbo
- Perrin Intercoolers
- exhaust housing interchange?
- Oil line fitting different in the same year?
- EGR plug what size for the turbo?
- compresson surge w/ BOV?
- wastegate wasted?
- simple dual stage boost controller
- Gates Power Grip Clamps
- stuck at 8 psi with waste gate all the way open
- intercooler pipes
- Replacing a DeltaGate
- Help? Bolt info needed.
- Anyone use a Volvo intercooler
- Non- TM turbo sizing LS1
- MBC/ what setting
- BOV placement
- Running 15LBS of boost on TII do I need to add a Injector?
- Tial 38mm BOV questions
- are these good
- holset question , yep an other one ...
- Cant get more than about 16psi. 2.5" puck housing to blame?
- Intercooler temp drops thread
- How many different 2 1/2" S/V castings are there
- external wastegate
- stock intercooler dimensions?
- Intercooler Velocity
- adjusting aftermarket wastegate actuator
- Intercooler tie bars?
- sometimes i have boost
- turbo?
- Ever heard of this brand?
- I searched: 2.2L Head / Turbo removal FAQ?
- need help figureing what turbo i need
- Custom Intercooler w/ Stock Dimensions Flow Better?
- confused on actuator
- T3 to He351VGT adapter!
- Turbine wheel/shaft weights.
- Enforcer 1 inducer size?
- Help me select a turbo
- stock boost for 88 shelby tona
- Turbo Surge! WTF?!
- Rebuliding a S60 questions
- flange for T2 downpipe
- Turbonetics Trim Calculation
- Noticable compressor surge(or turbo stall as JT would say) after installing CAI??
- Budget Intercoolers? Any difference?
- Turbo for road racing up to 450hp
- Interesting turbo setup
- 20g?
- TB0344 Any info?
- Intercooler On a Stock 2.5 TI
- How To install BOV on a 2.5 TI
- holset H1C
- Holset Questions
- Waste gate wide open still have serious boost creep.
- Zero Clearance Compressors?
- Thrust bearing failure?
- s60 rebuild question
- I can get my hands on a super 70 turbo but.....
- Change t2 x t3/t4 garrett
- SC61 edjumacation needed
- Holset HX35...
- Why oil return gasket should be installed dry...
- Isuzu NPR
- HY35 compressor to outlet pipe question?
- restrictor orafice Q
- Dead horse needs more beating...
- Holset HE351VE (VGT) picturs of installed ?
- Ebay intercooler
- What rad/ic combo for 91 Lebaron
- T03 compressor inlet/outlet sizes
- 46trim with 3" sw which housing
- using a banks sidewinder
- T3 stock turbo on 8V?
- enforcer2 max psi on a 8v
- Testing turbos (off car) for operation?
- what exhaust wheel with GN compressor
- Wanted: Your wastegate ideas (T3/T4 hybrid/Holset + larger)
- what do I have?
- F350 Wastegate can on T04E?
- BOV Mounting Location
- Nissan RB20 intercooler. Any good?
- turbo ?s
- Turbo pressure problem
- External Wastegate Controlled by Factory Solenoid?
- s70 reccomendations and rebuild
- I've got a BIG problem! Please help!!
- New turbo for my TIII.........
- TU turbo lines
- Swingvalve bolt thread/pitch?
- Where to get a holset discharge flange with a v-band?
- diverter valve?
- DYI Turbo Rebuild?
- adjusting wastegate arm
- open wastegate
- Hogging the hole
- compressor upgrade stock garrett?
- For those running Holsets...
- Good choice holset?
- Holset HX30 wheel sizes.
- what turbo is this
- The Acclaim Get's a Big'n
- Which turbo? GT35R or HE351CE?
- Is my wastegate leaking?
- external wastegate + stock manifold
- Separating turbine housing from center section
- innovative external wastegate
- Ford Housing to TU Header?
- Performance upgrade?
- Should I clean this out?
- Big Can Wastegate...
- cleaning a Holset.
- Ebay turbo for parts
- boost problems
- ok, want to make my own log header
- Holset oil feed adaptor
- The "Rat Mini" broke
- Benefits to newer style T-1 manifold over modded Log?
- TIII mods
- CXRacing OK?
- Rajay 600584-02
- turbo chrysler 3.7L (low boost)?? been done?
- Which BOV is better?
- water cooled Tial waste gate
- rebuild kit
- Where to get a preformed collector with a TS T3 flange?
- Some IC mini idea's (while keeping A/C)...
- solenoid WG control Vs. Pressure control
- GM 4 vs T3 turbo
- Turned boost up to 17, now what's the HP?
- Performance Computer, now only 5 psi
- hx35
- intercooler question
- Spearco Same Side Inlet and Outlet Ideas
- Mistu or Garrett
- xs power, ss autochrome, cxracing -turbos junk?
- Welding one side shut?
- Curious if I have a problem?
- Intercooler options for a minivan with A/C
- Twin turbo 440 what turbo's ?
- Please help me choose the best turbo for my goals
- Turbonetics ball bearing turbo-restrictor or not?
- compressor surge?
- Compressor surge and low boost.
- Decided to go with the Mitsu
- Whole set on T3
- HUGE boost differential?
- Dual pass FMIC?!
- d-valve